HDII-F SERIES CNC ROUTER
Techno CNC Systems HDII-F CNC Router is manufactured using the highest quality industrial grade CNC router components with all steel construction and superior components such as precision linear bearings and rails. Key features are a 12 HP HSD high frequency automatic tool changer spindle with 8-position tool rack, pneumatically retractable vacuum hood and multi-zone vacuum t-slot table. The system includes brushless AC servo motors and controls with a very easy-to-use hand-held controller
- 12 HP HSD high frequency automatic tool changer spindle
- Maintenance free brushless Yaskowa AC servo motors and drives
- Automatic tool calibration pads
- 4-zone vacuum T-slot table
- 8-position tool rack
- 24″ Gantry with 30″ z-stroke
- Easy to use Hand-Held Controller
- Open architecture works with all industry standard CAD/CAM software
The HDII-F Series machine comes standard with a 12HP HSD high frequency automatic tool changer spindle. This precision spindle requires no maintenance, uses industry standard ER collets and ISO 30 tool holders, and is fully programmable with speeds from 6000 to 24000 RPM, and comes complete with a pneumatically retractable vacuum hood.
The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.
TOOL HOLDER CLAMP
The Techno HDII-F CNC Machine comes equipped with a tool holder clamp fixture, providing a much easier way of inserting and tightening the CNC router bits into your tool holder. This method is safer and easier than using the common procedure of tightening the collet nut with two wrenches while the tool holder is still in the spindle.
The base frame is fabricated from heavy-duty tubular steel that is welded, precision machined and stress relieved so that the foundation remains true and steady over the operational life of the machine.
Automatic tool calibration pad allows for easy and accurate “Z” zero position for single and multiple tool changes through the program. The HDII-F includes (2) calibration pads; 1st is for fixed position, which records all tool length offsets and 2nd is for setting Z-Zero.
The vacuum plenum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles.
DRIVE TRAIN ASSEMBLY
The Techno HDII-F Series CNC Router uses precision helical gear racks on the X and Y axes. The mounting of the rack is inverted to help keep dust and debris from building up on the drive system, this assures smooth motion and long term reliability
The HDII-F Series machine includes an 8-position tool rack in the rear of the machine. The position of this rack allows for easy loading and unloading of material from either side of the machine.