BT1212 SERIES SUPPORT

PRoblem and Solution

PROBLEM: Handheld stopped working / screen and red power light on pendant is flashing

SOLUTION:
1. This could mean a few things: Handheld could have a break/bend in wire - Check hand held cable and connection to controller. 2. Controller is not getting steady +24VDC power - Look at the silver controller box. Find the Green terminal block that has 3 terminals (+24V, GND and 0V) - this is the power. Trace it back to see where it connects; this is the +24V power supply. Make sure everything is connected well on this. Check for a green light on the power supply; it should be bright green, not dim or flashing. 3. Loose wire in cabinet - Open cabinet and inspect all wire connections. Check incoming power / fuses / breakers inside.

PROBLEM: The machine has power (inside light is on).

SOLUTION: 1. This could mean a few things: Handheld could have a break/bend in wire - Check hand held cable and connection to controller. 2. Controller is not getting steady +24VDC power - Look at the silver controller box. Find the Green terminal block that has 3 terminals (+24V, GND and 0V) - this is the power. Trace it back to see where it connects; this is the +24V power supply. Make sure everything is connected well on this. Check for a green light on the power supply; it should be bright green, not dim or flashing. 3. Loose wire in cabinet - Open cabinet and inspect all wire connections. Check incoming power / fuses / breakers inside.​

Shopping cart

Subtotal
Shipping and discount codes are added at checkout.
Checkout