TITAN SERIES CNC ROUTER
DESCRIPTION:
The Titan Series CNC Router is manufactured using the highest quality industrial grade CNC router components with all steel construction with a 7-1/2” gantry clearance and 11-1/2” z-axis stroke so the clearance can be properly utilized. Key features include THK linear guide rails and bearings, precision helical rack and pinion with precision gear motors directly coupled to the helical pinion. The Titan series includes a 12 HP HSD high frequency automatic tool changer, with 8-postion tool rack, pneumatically operated vacuum hood that has concentrated air flow at the spindle, vacuum t-slot table controlled by a central gate valve, 10HP rotary vane vacuum pump, and pop-up pins for easy sheet alignment.
FEATURES:
- 12 HP HSD high frequency automatic tool changer spindle
- Maintenance free brushless motors and drives
- Vacuum t-slot table with main control gate value
- Pneumatic material pop-up pins
- Automatic tool length calibration via closed loop touch pad
- Automatic z-zero via secondary touch pad
- Easy-to-use hand held controller (optional PC based system available)
- Open architecture works with all industry standard CAD/CAM software
TITAN SERIES FEATURES
SPINDLE
The Titan Series machine comes standard with a 12 HP HSD high frequency automatic tool changer spindle. This precision spindle requires no maintenance, uses industry standard ER collets and ISO 30 tool holders, is fully programmable with speeds from 6000 to 24000 RPM, and comes complete with a pneumatically retractable vacuum hood
GANTRY
The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.
CONTROLLER
The hand-held controller is the heart of the operational system. This hand-held controller redefines the phrase “easy-to-use”. Customers can be up and running the same day power is connected to the machine. Every controller has very easy-to-read, -understand, and -execute commands. The setup introduction manual provides information that will have users cutting parts in minutes
GANTRY UPRIGHTS
The gantry uprights are cast iron with heavy duty gussets formed into the casting. Each support is machined for housing the various drive assemblies including motors, bearings, belts, and wiring harnesses.
TOOL Holder CLAMP
The Techno Titan CNC Machine comes equipped with a tool holder clamp fixture, providing a much easier way of inserting and tightening the CNC router bits into your tool holder. This method is safer and easier than using the common procedure of tightening the collet nut with two wrenches
VACUUM TABLE
The Titan machine includes a vacuum t-slot table that can be easily customized to fit your particular part geometry. The grid allows the gasketing to be routed around the table sections. In addition it included rubber plugs for zoning off specific areas. Vacuum flow is controlled via a main gate valve which lowers operating costs and save vane life.
DRIVE TRAIN ASSEMBLY
The Techno Titan Series CNC Router uses precision helical gear racks on the X and Y axes. The mounting of the rack is inverted to help keep dust and debris from building up on the drive system, this assures smooth motion and long term reliability. The precision gearbox is directly coupled to the drive motor and pinion. This eliminates belt stretch inaccuracies assuring high-speed machining while the system.
ELECTRONIcs
All the electrical components are housed and wired in a doubled-doored Nema electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet. In addition, the cabinet serves as a work bench for the tools.e cabinet serves as a work bench for the tools required
TOOLING
The Titan Series machine includes an 8-position tool rack in the rear of the machine. The position of this rack allows for easy loading and unloading of material from either side of the machine.
DRIVE MOTORS
The Titan Series CNC Router utilizes brushless drive motors and drives. These motors require no regular maintenance — therefore, reducing any maintenance downtime.
TOOL CALIBRATION
Tool Calibration is used for recording tool length offsets. Th isis an automatic process for easy storage of tool length offsets
Z-Zero Touch Pad
Automatic tool calibration pad allows for easy and accurate “Z” zero position for single and multiple tool changes through the program.
Take a Closer Look
